玻璃加工术语.doc

Glossary Of Terms 术语表 Alpha Value Alpha 值 An internal Pilkington value describing the complexity of a windscreen’s centreline profile (crosscurve). Typically, values 6 are feasible, 6 to 7 are difficult and 7 are beyond current capability. Usually measured at the top and bottom of the glass centreline. 皮尔金顿内部对有关前风挡中心线剖面（球面度）复杂度进行描述的值。当其值小于6时表示具有可行性，当其值在6和7之间时表示比较困难，当其值大于7时表示超出了目前的生产能力。 Alpha 值通常可以从玻璃中心线的上部和下部测量获得。 Angle of wrap to Pillar (maximum) 到车柱的弯曲角（最大） The largest angle measured at the pillar edge, between the glass and a chord across the glass (left/right). See diagram letter K 在玻璃车柱边测量，为玻璃和跨过玻璃的弦（从左至右）之间的最大角度。见图表中K部分。 Angle of Wrap to Roof / Trunk 到车顶/引擎盖的弯曲角 The angle measured between the glass and the centreline chord. See diagram letter H = Roof, letter J = Trunk 玻璃和中心弦之间的角度。图表中字母H部分为到车顶 的弯曲角，而字母J部分为到引擎盖的弯曲角。 APBL 高级夹层压弯工艺 Advanced Press Bending (Laminating). Process for producing laminated windscreens or backlights. 高级（夹层）压弯工艺：生产夹层前风挡或后挡的工艺。 APBT 高级钢化压弯工艺 Advanced Press Bending (Toughening). Process designed to produce complex toughened parts. 高级（钢化）压弯工艺：用于制造复杂钢化产品的工艺。 A-pillar A（车）柱 The side support to the windscreen 前风挡的边部支撑 ASB 高级侧窗弯钢化炉 Advanced Sidelight Bender - Gas Hearth furnace高级侧窗弯钢化炉－气垫床式钢化炉 Box Furnace 箱式热弯炉 System for making sag-bent windscreens. Versatile technology, using indexing box heating system. 自重弯曲制造前风挡的系统。使用分度箱式加热系统的通用技术。 CAD ID Identification number given to CAD files in Pilkington EuroCAD Database. Original customer CAD drawing number may also be shown here. 皮尔金顿EuroCAD数据库里CAD文档的识别号，该数据库中还可以显示出客户的原始CAD图纸编号。 Camber弯深 Maximum depth of bend with glass in four point contact with horizontal plane. See diagram letter D 玻璃上四个点和水平面接触时的最大弯曲深度。见图表中D部分。 Centreline Height 中心线高度 Maximum chord length measured at the centreline of windscreens and backlights (top to bottom). See diagram letter C 在前风挡和后挡的中心线位置测量的（从顶部到底部）最大弦长。见图表中C部分。 CPB传统压弯工艺 Conventional Press Bending. Equipment designed to produce simple and semi-complex