食物搅拌机安规要求.pptVIP

Motor-Operated Household Food Serving Machines Contents Introduction Polymeric Enclosure Requirements Construction Requirements Components Requirements Performance Other Information Introduction - 1 Introduction - 2 Introduction - 3 Portable Appliances - An appliance that is actually moved or can easily be moved from one place to another in normal use Stationary Appliances CUL Requirements Canadian Standards for Portable Electrical Motor-Operated and Heating Appliances: General Requirements, C22.2 No.?1335.1 Particular Requirements for Electrical Motor-Operated Kitchen Appliances, C22.2 No.?1335.2.14-93 Polymeric Enclosure Requirements - 1 Polymeric Enclosure Requirements - 2 Constructions - 1 Enclosures – To enclose all uninsulated live parts, moving parts and internal components Openings – No such parts accessible through openings Corrosion Protection Constructions - 2 Spacing between uninsulated live parts and dead metal parts – Table 18.1 Spacing between opposite polarities (1.6 mm, or 2.4 mm for wattage 249 W) Constructions - 3 Constructions - 4 Protection Against Injuries (Section 21) (cont’d) Guard – cannot be removed Interlock – cannot be defeated by probe, perform endurance test OFF position – clearly shown Constructions - 5 For Blender: Open-top container: the center opening 66.7 mm, and 25.4 mm Container Abuse Test () – During ice crushing, no cracking occurred Constructions - 6 For Food Chopper: Cover actuated interlock, with 10,000-cycle endurance test Misaligned cover – Opening not larger than 25.4 mm (b) S-blade cutting assembly – with handle Z…Z…Z…!Let’s take a break? Components - 1 Components - 2 Requirements of Components: Temperature / Voltage / Current ratings Power Supply Cord requirements: Type, length (refer to Section 11.1.1) Components - 3 Motor Protectors: Fusible link – length, diameter Thermal fuse – type, temperature Thermostat – automatic appli