GPFS安装册.doc

目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc344926015 GPFS 基本安装过程 PAGEREF _Toc344926015 \h 1 HYPERLINK \l _Toc344926016 GPFS performance and Infiniband: PAGEREF _Toc344926016 \h 4 HYPERLINK \l _Toc344926017 adding extra subnets（可选）: PAGEREF _Toc344926017 \h 6 HYPERLINK \l _Toc344926018 与LUSTRE文件系统共存环境搭建： PAGEREF _Toc344926018 \h 7 HYPERLINK \l _Toc344926019 Gpfs 基本卸载过程 PAGEREF _Toc344926019 \h 8 GPFS 基本安装过程 同步所有服务器时间，系统时间 准备并安装rpm包，升级包 准备依赖包，cp -rf /root/GPFS/6 /var/cache/yum/x86_64/ yum -y install rsh ; yum -y install libc.so.6 ; yum -y install ksh ; yum -y install libstdc++.so.5; yum -y install compat-libstdc++-33-3.2.3-69.el6.x86_64 cd /root/GPFS;rpm -ivh *.rpm ; rpm -Uvh update/*.rpm Linux客户端ssh无密码登录 ssh-keygen -t rsa 会创建/root/.ssh/id-ras.pub id-ras 公钥：/root/.ssh/id-ras.pub 私钥：/root/.ssh/id-ras 把公钥复制到authorized_keys ,并复制/root/.ssh到所有机器上的/root/目录. If your GPFS cluster is configured to use SSH/SCP, it is suggested that you increase the value of?MaxStartups in?sshd_config?to at least 1024. 设置环境变量 vi /root/.bash_profile PATH=$PATH:/usr/lpp/mmfs/bin 启用环境变量 source /root/.bash_profile 编译安装 cd /usr/lpp/mmfs/src make Autoconfig make World make InstallImages cd /usr/lpp/mmfs/src; make LINUX_DISTRIBUTION=REDHAT_AS_LINUX Autoconfig; make World;make InstallImages When using GPFS 3.2.1 and earlier there is not an rpm option to the GPFS GPL build process. In this case to distribute the kernel module binaries you can copy the files manually. You can see alist of these files when the make InstallImages process completes. These files are mmfslinux, mmfs26, lxtrace, dumpconv, tracedevcd, and they need to be copied to the /usr/lpp/mmfs/bin directory on the other nodes. 命令如下： mkdir /tmp/gpfs_cmds/ cp -f /usr/lpp/mmfs/src/bin/mmfslinux /tmp/gpfs_cmds/mmfslinux cp -f /usr/lpp/mmfs/src/bin/mmfs26 /tmp/gpfs_cmds/mmfs26 cp -f /usr/lpp/mmfs/src/bin/tracedev /tmp/gpfs_cmds/tracedev cp -f /usr/lpp/mmfs/src/bin/lxtrace.sial /tmp/gpfs_cmds/lxtrace.sial cp -f /usr/lpp/mmfs/