学科文献信息[008]详解.docVIP

学科文献信息 材料专题（ScienceDirect数据库） 第期 （总期） 2016年月日 《Materials Science and Engineering: A》Volumes 655 Improving the room temperature stretch formability of a Mg alloy thin sheet by pre-twinning Pages 1-8 Weijun He, Qinghui Zeng, Huihui Yu, Yunchang Xin, Baifeng Luan, Qing Liu Abstract {10?12} tensile twins were introduced by in-plane compression in a thin magnesium alloy sheet in order to tailor the texture. The room temperature stretch formability of the pre-twinned Mg alloy sheet was remarkably improved (50%). The activation of the tensile twinning in the pre-twinned region, which can effectively accommodate the through-thickness strain during stretch forming, is assumed to be the main reason of stretch formability improvement. Numerical simulation results demonstrate that multidirectional tensile twins induced by multi-steps compression are more beneficial to improve the formability of Mg alloy sheet, compared with uni-directional twins. Citing articles (0) The relationship between micro-structural evolution and deformation mechanisms for nanocrystalline Ni under high strain rate Pages 9-16 Rongtao Zhu, Yanfeng Li, Jianqiu Zhou Abstract To inspect deformation mechanisms of nanocrystalline materials under high strain rate, bulk NC Ni samples are prepared by plasma evaporation combined with hot pressure sintering, and dynamic impact mechanical properties of the samples are tested under different high strain rates on Split Hopkinson Pressure Bar (SHPB). After impact testing, the micro-structural parameters of the samples, such as grain size and micro-strain, are investigated by X-ray diffraction (XRD). The mean