线艺开关变压器结构设计指南-StructuredDesignofSwitching详解.PDF

Structured Design of Switching Power Transformers Transformer Design Procedure Design of switching power transformers can be accom- mine N . This value for N should allow non-saturating P P plished in a relatively simple manner by limiting magnetic operation to 100°C with reasonable core loss. configurations to a few core and coilform structures. These structures have been chosen both for their versatil- Step 3. Secondary turn count ity and their low cost. Dimensional information as well as Secondary turn count is a function of duty cycle and design information in the form of design curves for the primary turn count. chosen structures may be found at the end of this docu- ment. By using these curves, the complete transformer For a flyback system: can be designed. (2) Step 1. Structure size For a forward converter: The first step in the design is choosing a minimum struc- ture size consistent with the output power required. The (3) approximate power capabilities of each structure are provided in Table 1. If five or six outputs are required, Where: a larger structure may be required to allow the copper NP = the primary turn count. along with insulation and winding crossovers to fit in the NS = the secondary turn count.