AAMA 501---2007中英.docVIP

AAMA 501.5-07 Test Method for Thermal Cycling of Exterior Walls 1.0 SCOPE 1 2.0 SUMMARY OF TEST METHOD 1 3.0 SIGNIFICANCE AND USE 1 4.0 REFERENCED STANDARDS 2 5.0 APPARATUS 2 6.0 TEST SPECIMENS 3 7.0 SAFETY PRECAUTIONS 3 8.0 PROCEDURE 3 9.0 PERFORMANCE REQUIREMENTS 4 10.0 TEST REPORT 4 AAMA. The Source of Performance Standards. Products Certification and Educational Programs for the Fenestration Industry. All AAMA documents may be ordered at our web site in the “Publications Store”. ?2007 American Architectural Manufacturers Association – These printed or electronic pages may NOT be reproduced, republished and distributed in any format without the express written consent of the American Architectural Manufacturers Association. This document was developed by representative members of AAMA as advisory information and published as a public service. AAMA DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS INFORMATION, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL AAMA BE LIABLE FOR ANY DAMAGES WHATSOEVER FROM THE USE, APPLICATION OR ADAPTATION OF MATERIALS PUBLISHED HEREIN. It is the sole responsibility of the user/purchaser to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content published herein. AAMA 501.5-07 ORIGINALLY PUBLISHED: 1998 PRECEDING DOCUMENT: 501.5-98 REVISED: 4/07 PUBLISHED: 4/07 American Architectural Manufacturers Association 1827 Walden Office Square, Suite 550, Schaumburg, IL 60173 PHONE (847) 303-5664 FAX (847) 303-5774 EMAIL webmaster@ WEBSITE AAMA 501.5-07 Page 1 第一页 1.0 SCOPE范围 1.1 OBJECTIVES AND LIMITATIONS目标和局限性 This test method provides a standard laboratory procedure for evaluation of thermal cycling effects on large exterior wall mock-ups, components and cladding. This test method utilizes convective hot air to achieve the exterior air temperature setpoint. The convective hot air exposure method usually provides a more severe test than infrared radiat