IBM T23 常见故障解决方法(国外英文资料).docVIP

IBM T23 常见故障解决方法(国外英文资料) IBM T23 common fault solution 1: the blue screen Main board hidden trouble, memory is not compatible, hard disk is defective. Test method to run large software to test for 48 hours, see if blue screen appears. Memory checks for errors in memory test software. The hard drive USES MHDD to detect whether there is a bad way or a defect. 2: cant charge The mainboard ADP 3806 is easily damaged by replacing the chip. 3: power down The mainboard CPU power MAX 1718 damaged the replacement chip The mainboard CPU power supply inductance is unsoldered. Other power supply circuit fault, send repair. 4: crashing. Problem of graphics card, power chip failure, the machine is not cool. Run the software for 48 hours, check if the machine is dead, check if the CPU temperature is more than 55 degrees, more than most of the heat dissipation silicon fat failure. Change the heat transfer silicone grease to detect if the video card has the power supply voltage. The graphics card itself is damaged. 5: white screen, memory febrile abnormality The mainboard north bridge power supply inductance virtual welding 6: the center of the keyboard collapsed The mainboard anchor column is broken off and resoldered. 7: memory alarm Replace memory, replace memory slots. Check memory to see if there is a broken line in the north bridge line North and south bridge fail. Redo BGA 8: dark screen Screen line break High pressure plate failure Tube damage The mainboard insurance is broken Power chip failure 9: white The motherboard has no 3.3 V output screen circuit Power circuit fault Insurance is broken Insurance off screen Screen failure 10: fan error Reinstall fan Damage of fan 11: built-in network card is invalid There is a broken line between the motherboard and the network card and the cat 12: boot prompt error Resource conflict-allocation error static node # 02 Press f1 to setup Replace the network card 13: boot prompt error Resource conflict-allocation error static node # 00