PLC在组合机床控制中的应用(国外英文资料).doc

PLC在组合机床控制中的应用(国外英文资料) The definition of a programmable controller Programmable Controller, or PLC, is a new type of industrial control device based on computer technology. In 1987, the International electrotechnical commission (International Electrical Committee) issued by the PLC in the draft standard for PLC made the following definition: PLC is a specially designed for application in industrial environment and digital computing operation of electronic devices. It can adopt program memory, used in its internal storage to perform logic operation, order operation, timing, counting and arithmetic operations such as instruction, and can through digital or analog input and output, control various types of machinery or production process. PLC and related peripheral equipment should press easily and industrial control system to form a whole, easy to extend its function and the principle of design. Ii. The characteristics of the PLC High reliability, strong anti-jamming ability High reliability is the key performance of electric control equipment. PLC as a result of the modern large scale integrated circuit technology, USES the strict production craft manufacture, the internal circuit adopted advanced anti-interference technology, has the very high reliability. Mitsubishis f-series, for example, has an average of 300, 000 hours of trouble-free time. Some PLC, with redundant cpus, worked longer on average. From the closed circuit of PLC, the use of PLC control system, compared with the same size of relay contactor system, electrical wiring and switch contacts have been reduced to hundreds or even thousands of points, one of fault is greatly reduced. In addition, the PLC has a hardware fault self-detection capability, which can send out the alarm information in time. In the application software, users can also into the application of fault self-diagnosis for the peripheral devices, in addition to the PLC in the system of the circuit and equipment for the protection of faul