UG重点(国外英文资料).docVIP

UG重点(国外英文资料) 1, to complete a program generated through the following steps: CNC programming can be divided into four stages, preparation, technical scheme, nc programming, program setting. Create program, tool, machining geometry and processing method node group. Create operations. Specify the action parameters. The path of the cutter is generated. Check the knife track. Process and output shop process documents. What is the artifact in process (IPW)? Why use IPW? Because most parts require multiple processing operations to complete. Therefore, the state of the parts between each two processing operations is different. In UG CAM, define the artifacts that are left after each processing operation (IPW). IPW is unique to UG CAM milling machining. In machining process, in order to improve the efficiency of cavity milling process of manufacturing, processing the programmer must reasonably allocate processing parameters of each work step, this step will need to understand each work at any time after the completion of the blank material of the state, by processing the workpiece convenient function can achieve this goal. In the process of UG CAM, which five coordinates are often involved? What is the processing coordinate system? Five kinds of coordinate systems: absolute coordinate system, work frame, processing coordinate system, reference frame, and existing frame. The ACS: (1) the absolute coordinate system in the plot or processing space is fixed, unable to move is not visible in the large assembly is used to find the mutual relationship between parts is very convenient. Working frame WCS: applied widely in the process of modeling, the axes can move in space. Processing coordinate system (MCS). The processing coordinate system is also movable and is very important in the processing of parts. After post-processing, the target value of the program is determined relative to the origin of the processing coordinate system. In the graph area, each axis is marked with M, an