养护知识大全(国外英文资料).docVIP

养护知识大全(国外英文资料) Replace the air filter Function: filter the dust and particles in the air. Prevent the cylinder from inside the cylinder. This will accelerate the wear and tear of the cylinder. Installation position: in front of the throttle. Installation considerations and maintenance: (1) the air filter must be maintained regularly and not replaced by air compressors. (2) the air filter will be replaced every 2500km. The environment is bad enough to shorten the time. When installing, pay attention to the type and size of the air filter (4) when installing. Pay attention to the direction of the air filter. (5) when installing, pay attention to the installation of air filter to prevent cracks. Oil filter and oil change The function of lubrication system: sealing, cooling, buffering, cleaning and lubrication. Oil is the medium of lubricating system. Class of oil: Generally speaking, the label on the oil is the oil viscosity classification of the American association of automobile engineers (SAE). This is a classification of viscosity classification, which divides the lubricating oil into the hot type of summer, the cold type of winter and the all-weather type of winter and summer. The specific classification of lube oil is 6 kinds of winter oil, 4 kinds of oil in summer, 16 kinds of general oil in winter and summer. (1) Winter oil brands are: 0 W, 5 W and 10 W, 15 W, W, 20 W, symbol W represents Winter Winter (in Winter), before the W, the smaller the number, the smaller the viscosity at low temperature low temperature fluidity, the better, for the lowest temperature of the lower; (2) the summer oil plate number is 20, 30, 40, 50, the bigger the number, the higher the viscosity, the higher the maximum temperature; (3) the winter and summer general oil brands are: 5 w / 20, 5 w / 30, w / 5 w / 40, 50, 10 w / 20, 10 w / 30 and 10 w / 15 w / 40, 50, 10 w / 30, 20, 15 w / 15 w / 40, 50, 20 w / 15 w / 20, 20 w / 30, 20 w / 40, 50, 20 w/on behalf of the winter with the smal