基本放大电路(国外英文资料).docVIP

基本放大电路(国外英文资料) Basic amplifier circuit In brackets? Or x indicates whether the following statement is true. (1) only the circuit amplifies the current and amplifies the voltage. (a) (2) we can say that any amplification circuit has a power amplification. (a) (3) the current and voltage in the amplifier circuit are provided by the active components; (a) (4) the communication components of each charge in the circuit are provided by the communication source; (a) (5) the amplifier circuit must be coupled with the proper dc power supply to work properly. (a) (6) when the input signal is a dc signal, the output of any amplification circuit will not change when the input signal is a dc signal. (a) (7) the bottom distortion of the output voltage is the saturation distortion as long as the coincident amplification circuit. (a) (8) the transistors input resistance rbe is a dynamic resistance, so it has nothing to do with the static work point. (a) (9) in the basic coincident amplification circuit, if the transistors beta is doubled, the voltage magnification is doubled accordingly. (a) (10) the voltage amplification of the amplification circuit is always less than 1, so it cannot be used to power amplification. (a) (11) only when two transistors are of the same type (both NPN tubes or PNP tubes) can be composed. (a) (12) the type (NPN or PNP) of the complex tube is the same as the type of pipe that forms it. (a) (13) the input resistance of the tube must be improved by the combination of two transistors. (a) (14) the beta value of the composite tube is approximately equal to the product of its transistor beta. (a) (15) the empty current of the composite tube is equal to the sum of the empty dielectric current that makes up its transistors. (a) Two similar transistor (16) (for example, are NPN transistors) composite, due to the superposition of two tube UBE, affected by the temperature increase, so it produces drift voltage is larger than single pipe. (a) (17) two field-effect