高级焊工技能理论试题及答案(国外英文资料).docVIP

高级焊工技能理论试题及答案(国外英文资料) Advanced welder skills theory questions and answers Explanation: the test is oneself from the Internet search, not original. Only for study. Advanced welder skills theory test One. Fill in the blanks: The tensile strength, yield point, elongation and profile of weld metal and welded joint can be measured by tensile test of welded joint. Answer: the shrinkage rate The form of tensile test specimen of welding joints can be divided into plates, circles and three kinds. A: the whole tube After the tensile test, the fracture position of the specimen and the defect in the fracture area shall be recorded and filled in the report. A: welding After the specimen is bent, its front is the bending test of the curved stretch surface. Answer: the surface bending The specimen of bending test can be divided into tablets and two forms. A: the pipe The numerical value of the bending test is measured in terms of Angle. Answer: the bending Impact test can be used to determine the impact toughness and sensitivity of welding joints. Answer: the gap The purpose of the flattening test is to determine the plasticity of the welded joint. A: the pipe 9, at present, the important products such as boiler, pressure vessel, large ships, etc., are widely used in X-ray detector as an important method of inspection of weld quality. A: X The core of the X-ray device is a special tube. A: X ray According to the regulations, the quality standards of the steel weld ray inspection shall be the same. A: four When ultrasound is transmitted from one medium to another, it produces reflection and phenomena. A: refraction Ultrasound is produced by the use of effect. A: piezoelectric Ultrasonic pulse reflection is the full name of ultrasonic inspection equipment. Answer: the flaw detector Fluorescence testing is used to detect certain materials. Answer: the non-magnetic When the surface is defective, a red image is displayed on the white color. A: imaging agent The method of hydrogenation