磁式排屑机使用说明书.docVIP

使 用 手 册 产品名称：磁式排屑机 产品型号：GWCS 出厂日期：2011年6月5日 北京国伟机械制造有限公司 使用说明书 共 3 页 第 1 页 一、性能特点 本排屑装置是利用永磁材料所产生的强磁场的磁力，将粉状、颗粒状及长度小于100毫米的铁，或将油、乳化液中的碎屑分离，吸附在排屑机的工作磁板上，输送至指定的排屑箱中的机床辅助设备。可广泛用于数控机床、组合机床、加工中心、齿轮加工机床、钻、镗、铰、拉等机械加工设备和自动线、流水线的铁屑输送。可用于干式或湿式加工的铁屑处理。定量排屑，不产生过载。转动零部件密封，工作可靠，运转平稳，噪声低，寿命长。根据主机可任意配置安放。可单机工作，也可与主机联动，还可做为小零件的输送器和提升器，是现代机械加工行业中的理想配套设备。 Manual Product Name：Magnetic Chip Conveyor Product Type：GWCS Release date：Oct-17, 2010 Beijing Guowei Machinery Manufacturing Co., Ltd. Manual 3 pages Page 1 Features The chip device works through the strong magnetic field generated by permanent magnet material. Powder, granular, Iron with length less than 100 mm and oil emulsion in the debris separation, all these can be taken into the machine magnetic board，then be delivered to the specified equipment box. It’s widely used for CNC machine tools, machining centers, gear cutting machines, drilling, boring, hinge, pull, other mechanical processing equipment and automatic lines for iron transport, for both dry or wet iron processing. Quantitative chip, no overload. Rotating seal parts, reliable, smooth running, low noise, long life. Any configuration can be placed under the host. It can work stand-alone or interact with the host, also can be the conveyor or lifter of modern machinery processing industry. Structure and composition This device is mainly composed of gear reducers, conveyor, shell, strong magnets and other components. Based on different requirements, it can be equipped by configuration tanks, cooling pump, eddy current separator, electronic control box, set cars and other debris, etc. 3. Attentions 1st, when the machine starts to work, the chip unit must be turned on, otherwise the accumulation might be piled too much and lead to delivery failure or seizure. 2nd, The chip conveyor should not be placed too long without working, if it’s not used continuously for more than a month, please start the chip machine, and let it work unloaded for at l