双相钢拼焊板温拉伸晶粒尺寸模型的建立与应用.pdfVIP

|民报..川 ι) 202μ11 江系火学 f32 叶 JOURNAL OF JIANGSU UNIVERSITY(Natural Science Edition) doi: 10. 3969/j. issn. 1671 -7775.2013.04.013 双相钢拼焊板温拉伸晶粒尺寸模型的建立与应用 陈炜，刘政，赵青，陈志峰，陈义荣 (江苏大学机械工程学院，江苏镇江212013 ) 摘要:在形变温度为 550 -700 c、应变速率为 0.0001 -0.100 0 S-I 范围内，对 B340/590DP 双相 钢拼焊板进行温单向拉伸试验和金相分析试验，研究双相钢拼焊板变形条件和晶粒尺寸之间的关 系.基于 Z 参数建立了双相钢拼焊板母材和热影响区的晶粒尺寸数学模型，研究温拉伸条件下双 相钢拼焊板晶粒尺寸的变化规律.结果表明:应变速率越低、形变温度越高，双相钢拼焊板动态再结 晶现象越明显，母材和热影响区晶粒尺寸越大;将该模型导入 ABAQUS 软件，通过试验和仿真结果 比较，验证了所建晶粒尺寸模型的准确性，通过此模型可以预测不同变形条件下双相钢拼焊板母材 和热影响区的晶粒尺寸. 关键词:双相钢;晶粒尺寸;动态再结晶;应变速率;温度;铁素体 中图分类号: TG457. 11; TGl13 文献标志码:A 文章编号: 1671 一 7775(2013)04 -归40-04 Establishment and application of grain size model of dual phase steel laser tailor welded blanks in warm tensile test Chen Wei , Liu Zheng , Zhαo Qi略， Chen Zh拚略， Chen 盯YLron (βSch∞1 of Me配cha捆m町cal Engin配e酣eer白町rin甘臼吨n1咆g ， Jiangsu University , Zhenjiang , Jiangsu 212013 , China) Abstract: The tensile properties and microstructures of dual phase steel laser TWBs were investigated at temperatures range from 550 to 700 C and strain rate range from 0.000 1 to 0.1000 S -1. The correla- tion of deformation conditions and grain size were discussed. Based on Z parameter , the grain size models of base metal and heat-affected zone of dual phase steel laser TWBs were established to investìgate the variations of grain size. The results show that as strain rate decreases or temperature increases , the dy- namic recrystallization becomes stronger , and the grain size of base metal and heat-affected zone of dual phase steel laser TWBs grows bigge r. The models were i