4.CAD入门学习笔记(国外英语资料).doc

4.CAD入门学习笔记(国外英语资料) Hou teacher classroom produced -- -- -- -- -- -- -- -- -- -- AUTOCAD2007 1. toolbar Toolbar Right click on the toolbar directly Commonly used: 1, drawing and modification 2., marked 3. features and layers 2. cursor adjustment Tools menu bar / options / display / cross cursor size / select / pick box size (slightly larger) 3. select method left key Click Select Frame selection From left to right (blue) contains all objects From right to left (green) as long as you hit the object Four Cancel ESC Delete delete (delete selected object) Undo ctrl+z Redo ctrl+y 5. middle key Double click to display all of the objects in the screen Scroll zoom objects Press and drag to move the object *6. command bar Where all commands appear, draw objects by looking at the command bar Seven Orthogonal F8 Horizontal and vertical states that can only be drawn horizontally and vertically when opened Object capture F3 Find a special point, right click the object capture / settings / control point switch Object tracking The function of the ruler, the cursor at the point, and slowly pull out, the ruler can appear 8. determine key The spacebar returns to the right mouse button 9. straight line Specify the starting point, pull out the direction, enter the length, click OK Relative coordinate After you specify the first point in the line, enter the coordinate value (X, Y) Note: coordinate is the coordinate of relative starting point - - - - - - - - - - - - - - - -- Line L 1. angle judgment The zero position is at the horizontal line on the right side of the starting point The angles are counterclockwise, and the clockwise is negative 2. angle input method After the specified starting point, pull out the direction input length shift+ angle value * click the OK button again after the command is over, repeat the last command Tectonic line XL 1. note The command column appears or or before as the current command, which can be operated directly Or after the command, for the extended