ProE的秘密(高级技巧)(国外英语资料).doc

ProE的秘密(高级技巧)(国外英语资料) ProEs Secret (advanced technique) 1. puts the PRO/Es graphics in the word document Method: first in the Pro/E in the wireframe model (also in the drawing mode) directly saved as *.CGM file, and then insert the WORD in this method, the effect is very good, the image is vector graphics, so can zoom is not fuzzy, this method is suitable for line drawings Two methods: direct use of capture software (such as HyperSnap-DX) capture, shit like Shuo pepper bite, Aaron Huang? Custom pictures for 2.POR/E rendering View color and appearance (wildfire version) 3. how to transfer parts from Pro/E to 3D MAX for rendering First export the part to the IGS file (method File Save, Copy appear the Save a Copy dialog box, and select IGES (*.igs) in the type column a In 3D MAX, call the IGS file for rendering 4. render function The wildfire version uses CDRSs same rendering engine, much better; rendering capabilities in View Model, Setup PhotoRender Change the color of an entity or surface in a part. Function in View Model Setup Color and Appearance 5. Association view View-Relate View, click the view, click the Item that needs to be associated. 6. create kill edge Wall. Sheetmetal---Wall---Extrude---use radius, 1: use the inside edge of the sheet metal to establish the feature, and its inside radius must be 0; Two: the use of sheet metal outer side stretching to establish features, the inside radius must be 0; to draw the outline of the outer line. 7. create edge Remove the gap first; Sheetmetal---Wall---Extrude---use radius features tensile on the resection edge. Inside radius is set to 0. 8. tap tapping Hit bottom; Sheetmetal---Wall---Swept-.Use Radius; sketch the height of the hole; define Radius; Cosmetics---Thread, pay attention to choosing the straight hole on the turning hole. 9. modify the display boundaries of Partial, view, or detail view View-, Modify, View-. Boundary; 10. converts views to model independent Modify view-. Snapshot 11. fake Draw