加工英语对照(国外英语资料).docVIP

加工英语对照(国外英语资料) Type = Mill_Contour Subtype Treatment mode describe CAVITY_MILL cavity mill The basic cavity milling operations are used to remove rough or IPW and parts defined by a certain amount of material, with many flat cutting modes. Cavity milling is often used in rough machining. ZLEVEL_FOLLOW_CAVITY cavity mill Cutting within the shape using the following workpiece cutting mode. ZLEVEL_FOLLOW_CORE cavity mill Cutting the outside of the shape using the following workpiece cutting mode. CORNER_ROUGH cavity mill The remaining material in the cutting corner can not be removed because of the diameter of the previous tool and the radius of the corner. ZLEVEL_PROFILE Z grade milling Basic Z milling for contour milling of parts or cutting areas in a flat cutting manner. ZLEVEL_PROFILE_STEEP Z grade milling Same as ZLEVEL_PROFILE, but only cutting steep areas. Often used with the CONTOUR_AREA_NON_STEEP in order to control the residual peaks during the finishing of the cutting area. ZLEVEL_CORNER Z grade milling A corner area that cannot be reached because of the diameter and corner radius of the tool. FIXED_CONTOUR Curved contour milling The basic fixed axis surface profile milling operations are used in various driving methods, containment and cutting mode contour milling parts or cutting areas. The tool axis is +ZM. CONTOUR_AREA Curved contour milling A regional milling drive used to cut selected surfaces or cutting areas in a variety of cutting modes. Often used in semi finishing and finishing. CONTOUR_AREA_NON_STEEP Curved contour milling Same as CONTOUR_AREA, but only cutting non steep areas. Often used with the ZLEVEL_PROFILE_STEEP in order to control the residual peaks during the finishing of the cutting area. CONTOUR_AREA_DIR_STEEP Curved contour milling Zone milling drive for cutting only non steep areas based on cutting direction. Used with CONTOUR_ZIGZAG or CONTOUR_AREA in order to reduce residual peaks by cross forward reciprocating cutting. CONTOUR_SUR