压力容器设计步骤(国外英语资料).docVIP

压力容器设计步骤(国外英语资料) Taking the design of the pressure stabilizing tank as an example, the whole process of container design is explained. First, we designed according to the technical agreement proposed by the users, in the range of pressure vessel code within the signing of legally binding books, the agreement can be agreed by both parties to revise and improve, in order to achieve the optimal use of products. According to the design and technology agreement of the pressure vessel, we know that the maximum working pressure of the container is 1.4MPa, the working temperature is 200 DEG C, the working medium is compressed air, the volume is 2m3, and the service life is 10 years. These parameters are the design basis that the user provides us. With these parameters, we can begin the design. I. The first step in design Is to complete the technical characteristics of the container table. In addition to heat exchangers and tower containers, the technical characteristics of general containers include A container class B design pressure C design temperature D medium E geometric volume F corrosion margin J weld factor H main pressure components, material and so on. In general, I have not done on the drawings, forced to write the main pressure components material I. determine container categories Pressure vessel safety technology type of vessel issued by the State Bureau of quality and technical supervision (hereinafter referred to as the content regulation) the first chapter sixth (P7) has detailed provisions, mainly according to the size of the working pressure (p75), medium of harm and damage to the container division (p75). In this case, the pressure regulating tank is low pressure (1.6MPa), and the medium is non-toxic and non flammable, and it shall be classified as type I vessel. Another: specific pressure vessel classification, see training materials P4 1-11 Flammable media, see P2 1-6 The extent of toxicity of the medium is seen in P3 1-7 For classification of pressure