风管的制作与安装(国外英语资料).docVIP

风管的制作与安装(国外英语资料) U - shaped fixed card can be used for duct connection with many metal components, such as air, muffler etc.. Tapping screws can be used to secure the U shape cards and components. (4) connection with round metal hose Plate splicing Because of the possibility of bonding plate, after cutting the narrow stitching after repeated use. The two part is cut into 45 degree side, adhesive bonding, and then aluminum foil tape affixed to the two narrow seam. Installation methods and tools The appropriate tools and engineering organization right and good construction practice can be installed a durable and stunning duct system. The following tools help to improve quality and efficiency. construction organization Field assembly: (1) give each worker detailed drawings of the sections and fittings required for each zone or fan. (2) ensure that the construction staff understand the requirements of standard pipe construction, especially that the original construction drawings are made of metal ducts instead of MDC. (3) provide all the items for the correct installation so as not to replace them on the spot. Include： Required adhesive tape, adhesive. For reinforcement and installation, equipped with binding guns and mounting tools. The device is connected, fireproof valve, hose connectors and other accessories for popular duct system design. (4) ensure that the construction staff can: Reduce loss and properly repair all damaged pipe sections. Keep the duct well. Make sure the assembled air duct is tight connected. Assemble the largest number of pipe sections for lifting. Lift and support the air duct at the correct intervals. (5) all seams must be on one line. Changing the seam will cause incorrect duct alignment; the wind pipe will twist or rotate, indicating that the duct is not operating correctly when grooving or forming. (6) check whether the pipe is properly connected and strengthened. Repair damaged pipe surface with permitted sealing material. Construction to