110kv变电所电气部分的设计大学毕设论文.doc

摘 要 本设计为建平变电所电气部分的设计（110 kV/10kV）。本次设计的变电所是在当前建平县概况的前提下进行的，设计负荷充分的考虑到建平地区的工业及非工业情况，明确在变电所所有供电负荷中，哪些是一级负荷，哪些是二、三级负荷，并对相应的负荷采取不同的供电措施,以保证供电质量和供电的可靠性。 因本次设计的110KV变电所属于高压网络，该地区变电站所涉及方面多，考虑问题也多，在分析变电所担负的任务及用户负荷等情况下，慎重的进行选择所址。充分利用用户数据进行负荷的统计和计算，确定对进行用户无功功率补偿装置，同时进行变电所主变压器的选择，使变电所在能满足当前供电负荷的情况下，同时能满足未来5-10年该地区的供电负荷。考虑安全、可靠、灵活和经济，确定变电所的电气主接线的接线方式。再进行短路电流计算，以便选择设计变电所的高低压电气设备和导线，同时对它们进行校验。 本变电站的初步设计包括了：（1）总体方案的确定（2）负荷计算（3）主变压器的选择（4）电气主接线的确定（5）高低压配电系统设计（6）继电保护（7）防雷与接地保护等内容。 随着电力技术高新化、复杂化的迅速发展，电力系统在从发电到供电的所有领域中，通过新技术的使用，都在不断的发生变化。变电站作为电力系统中一个关键的环节也同样在新的技术领域得到了充分的发展。 关键词：变电站；负荷；主变压器；电气主接线；高低压电气设备 Abstract This design is a part of Jianping electrical substations excogitation(110 kV/10kV).The substation was designed on the basis of Jianping electrical power situation, think over the industry and non-industrial of Jianping district to design, according to thinking about what is the first class load ,the second class load and the third class load explicit about the load of the substation in Jianping. Using the different measures in line with the relevant the load situation to ensure the quality of power supply and service reliability of customers. Because of this design are high-voltage network 110KV substation, substation in the area in more involved, consider the problem more, substation in the analysis tasks and user load such circumstances, careful to choose the site. Make full use of user data for statistical and computing load, determine for reactive power compensation device users, at the same time the choice of main transformer substation, to meet the current electricity substation in the case of load, at the same time the next 5-10 years to meet the regions electricity load. Consider safety, reliability, flexibility and economy, to determine the electrical substation main connection of wiring. Further short-circuit current calculation, in order to choose the design of high voltage electrical substation equipment and wires, check them at the same time. The preliminary desig