采煤机牵引部说明书.docVIP

摘 要 我国是采煤大国，采煤机是现在最主要的采煤机械，而采煤机牵引部是采煤机的重要组成部件。它负担着采煤机工作时的移动和非工作时的调动，而且牵引速度大小直接影响工作机构的效率和质量。所以对采煤机牵引部设计具有重要意义。 设计主要从上对结构进行设计。对进行了详细计算。还牵引电机输出的转矩经圆轮和齿轮减速后， 关键词：采煤机；牵引部； Abstract Abstract: Now our country is a coal power, coal winning machine is the main coal mining machinery, the ministry of coal winning machine traction is an important part of coal winning machine. It pays for shearer mobile at work and non-work to mobilize, and traction speed size directly affect the work efficiency and quality. So the shearer traction part design is of great significance. Design mainly by the ministry of coal winning machine traction as the research object, mainly from the practical application of traction on the structure design. And through the analysis of the shearer traction of calculation, design structure that conform to the requirements of the job. Then system of conical gear and spur gear and the traction axis has carried on the detailed calculation and strength check. And also for the development of coal winning machine of general situation, types, made a brief introduction. The traction motor output torque of the cone gear and spur gear deceleration, finally will transfer of torque and power to the cutting department. Design structure with good traction, reliable operation, long service life, sensitive reaction, simple structure, high efficiency. Key words: coal-winning machine；traction unit；gear 目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 采煤机的发展概况 1 1.1.1 国际上采煤机的技术发展状况 1 1.1.2 国内采煤机的发展状况 3 1.2 采煤机的 5 1.3 研究目的和意义 第2章 传动系统的设计 8 2.1 主要设计内容及参数 8 2.2 设计方案的确定 8 2.3 电动机的选用 10 2.4 传动比的分配 10 2.5 传动系统的计算 11 第3章 高速级圆锥齿轮齿轮设计计算 13 3.1 选定齿轮类型、材料 13 3.2 初步确定主要参数 13 3.3 齿面接触强度核算 15 3.4 轮齿弯曲强度核算 17 第4章 中间级齿轮设计计算 20 4.1 选定齿轮类型、材料 20 4.2 初步确定主要参数 20 4.3 齿面接触强度核算 23 4.4 齿轮弯曲强度核算 26 第5章 低速级齿轮设计计算 29 5.1 选定齿轮类型、材料 29 5.2 初步确定主要参数 29 5.3 齿面接触强度核算 30 5.4 齿轮弯曲强度核算 32 第6章 轴的结构设计 33 6.1 低速一轴结构 33 6.2 低速二轴结构 38 6.3 低速三轴结构 41 6.4 其他主要零件计算 44 6.4.1 轴承的选择以及寿命计算 4 6.4.2 轴