flash快捷键介绍(国外英语资料).doc

flash快捷键介绍 Flash shortcut key usage 1. [window] [time axis] shortcut key ctrl+alt+T. Turn on or off the timeline. 2. [window] [properties] [Properties menu], shortcut key ctrl+F3 3. [window] [library] shortcut key F11 4. [window] [alignment], shortcut key, ctrl+k. Align panels are used to align objects, and can arrange the locations of multiple selected objects in the same scene. [align] can first use panel along the horizontal or vertical axis alignment of the selected object; secondly can tell the selected object distribution according to center spacing or edge spaced, adjust the selected object size, so that all the objects in the horizontal or vertical dimension and the maximum size of the selected line like, can also be selected the object and the alignment stage. [align] the panel is divided into four functional blocks, aligned, distributed, matched, sized, and spaced. The effects of each button are as follows: alignment, relative to the stage] button: all the alignment points are the four sides of the stage. [align] - [], left align all selected objects to the left of the left object reference left aligned. [align right]: all right to the candidate object as the reference right aligned. [horizontally centered] align horizontally at the center of the selected object. [align = align] all selected objects are aligned on top of the object. [center vertically] align the center of the selected object in the vertical direction. [align bottom] align the bottom of the selection to the base of the constitution. - [distribution]: [two] above the top of the object distribution along the upper and lower adjacent space. [vertical centers] the vertical center equal spacing between two adjacent objects. [match size] adjusts the width and height of the selected object. [intervals] the upper and lower or the two adjacent objects are equally spaced. 5. [info panel] Click on [window] [info] menu options, shortcut key ctrl+I 6. By default, [] and [deformation of transfiguration