plt文件批量打印(国外英语资料).docVIP

plt文件批量打印 First, the PLT file is generated in the AutoCAD plot command, select the print to file, press OK to generate the PLT file, then the PLT file is in your current AutoCAD selected printer model is matching. That is, if you generate PLT files, the system is the HP1000 model of the printer, then you generate the PLT file can only be printed on the computer when the HP1000 printer to print, change the model will not work. ?? The original print PLT file, there are generally two ways, are in the DOS state (now not tried) 1, copy, *.plt, PRN 2, press ctrl+p, and then type type *.prn PRN ?? No previous LAN, only one computer connected plotter will drive to install the plotter in all on the computer to generate the PLT file on the other computer, then the PLT file copy to connect with the computer by the plotter, print command, now there is a general LAN sharing, would not be in such trouble. This is the original purpose of having this function of PLT, because it is impossible and unnecessary to have one printer per computer. A LAN can not generate PLT files, but there are still people, it has two purposes: one is for internal management, in order to secure or in order to control the cost, unit does not allow the drawing and print their own by the person in charge, if not by drawing generated PLT file, the setting is not uniform is very troublesome. Two is PLTs own derivative function, you can focus on printing, play the batch print effect, know that DOS command friends know, available * as a wildcard, that is: copy, *.plt, plt1. However, this is not a AutoCAD batch printing concept. ?? Batch printing utility builds a list of AutoCAD graphics to print. Users can use this list to print immediately, or save it in a batch print list (BP3) file. The batch printing utility (batchplt.exe) is located in the AutoCAD program folder. It is strongly recommended that users print multiple graphics using Design Publisher (PUBLISH). You can use the BP3 (batch print list) file with