PVC材料(国外英语资料).doc

PVC材料 Boiler model Note: red is the real-time measurement point needed to be collected Blue is the point of artificial input Black is an intermediate variable Part 1 boiler efficiency 1.1 excess air factor Exhaust oxygen The excess air coefficient = 21 / (for exhaust oxygen) 1.2 basic coefficients Low calorific value (usually not at this point requires manual input) K1, K2, K3, K4: Calculation of boiler efficiency coefficients K1 = 0.0576 + 0.02337 * low calorific / 1000 K2 = 0.699 + 0.303 * low calorific / 1000 K3 = 0.9081 - 0.0163 * low heat / 1000 K4 = -0.0139 + 0.0089 * low heat / 1000 1.3 specific heat of exhaust gas Exhaust gas temperature Exhaust gas specific heat = 0.9657 + 0.0005 * smoke temperature - 0.000001 * smoke temperature * smoke temperature 1.4 flue gas heat loss Specific heat of exhaust gas Excess air factor Exhaust gas temperature Cold air temperature (air inlet temperature of blower) Low calorific value K1, K2, K3, K4: Calculation of boiler efficiency coefficients Dry gas heat loss = flue gas specific heat / low heat output * (coefficient K1 + coefficient K2 * excess air factor) * (smoke temperature - cold air temperature) * 100 Moisture heat loss = 1.88 / low heat * (coefficient K3 + 0.01 * (coefficient K4 + coefficient K2 * over air factor) * (smoke temperature - cold air temperature) * 100 Flue gas heat loss = dry gas heat loss + moisture heat loss 1.5 incomplete chemical combustion loss Heat loss of flue gas (fixed value, determined according to each factory situation) Q3_b = 0.5 1.6 mechanical incomplete combustion loss Qdw: low calorific value Ay: ash content Cfh: carbon content in fly ash Clz: carbon content in slag Mechanical incomplete combustion loss = 33730 / low heat * ash * (0.9 * ash carbon content / (100 - fly ash carbon content) + 0.1 * slag carbon content / (100 - slag carbon content)) 1.7 heat loss Main steam flow rate under rated working condition Exp: natural index Main steam flow Loss of heat = 5.82 * rated main steam flow *