东财11春学期《施工技术》在线作业(随机)6(国外英语资料).doc

东财11春学期《施工技术》在线作业(随机)6 More than 11 spring semester online construction technology three (random) Total score: 100 test time: - test scores: 88 Multiple topics First, radio questions (15 questions, 60 points) Score: 56V 1. usually, when the formwork is removed, the strength of the concrete reaches at least the standard value of the strength of the concrete to be designed: () A. 50% B. 50~75% C. 100% D. 75% The correct answer: D Full Score: 4 points: 0 Process flow of 2. steel cold drawing (A.) for steel rolling head -- in addition to skin - Roberts B. in addition to skin -- steel rolling head - Roberts C. steel rolling head - drawing - in addition to skin The correct answer: A Full Score: 4 points: 4 3. column binding is the use of straight hanging binding method or oblique hanging binding method, mainly depends on: () A. column weight Section form of B. column C. column wide bending resistance D. column narrow surface bending ability The correct answer: C Full Score: 4 points: 4 4. the application scope of bored piles is: (A.) saturated soft clay The groundwater level of B. is low and there is no groundwater in the depth of pore formation C. ground water contains no corrosive chemical composition D. applies to any soil The correct answer: B Full Score: 4 points: 4 5. large plate angle connection scheme adopts: (A.) small angle mold scheme B. large angle die scheme C. board seam D. small angle die scheme and large angle die scheme The correct answer: D Full Score: 4 points: 4 6. when the precast pile is made, the placement of the upper pile or adjacent pile can only be carried out at the design strength of the lower pile concrete: A. 30% B. 50% C. 70% D. 100% The correct answer: A Full Score: 4 points: 4 7., the best design plane is to meet the requirements of design planning, production process and transportation, drainage and other requirements, as far as possible: () A. earthwork minimum B. earthwork fill and dig balance C. minimum transportation work D. earthwo