吊具设计资料(国外英语资料).doc

吊具设计资料 University of Electronic Science and technology, master thesis The general design process and analysis and calculation methods of the two kinds of slings are summarized By means of programming and calculation, the load of each sling scheme under various working conditions is given, and the scheme is completed through comprehensive analysis Choice。 The overall scheme, layout and main parts of XX-1 rocket sling are optimized, Mechanical analysis and calculation, combined with the rigid strength finite element analysis, verify the main functions and technical parameters of the product. most After that, the rocket sling was successfully used to solve the problems encountered in the production and transportation of XX-1 rockets. The design principle, design process, calculation analysis and other methods of engineering analysis and calculation can be applied to other projects Designers reference. In this paper, the design principle of horizontally reproduced spreader is expounded, and several kinds of special sling for XX-1 rocket are studied The general process of design and calculation of horizontal spreader is introduced in detail In recent years, with the popularization of computer technology and the continuous improvement of computing speed 1.3.2 the significance of this study The design model of spreader is set up to provide a new design for spreader design of follow-up research, Ensure that the following model design scheme is correct, and avoid repeated design affecting the development cycle schedule; E. to solve the hoisting problem of large section of thin-wall structure. Design principle Lifting is smooth and safe. In the design and development process, the main The use of reliability principles, practical principles and economic principles. Several different implementations are designed and implemented Comparison and selection, selection of performance to price as far as possible to achieve the optimal equipment cost to the requirements of the task b