壁纸的铺装工艺(国外英语资料).doc

壁纸的铺装工艺 Wallpaper pavement technology Pavement wallpaper what people may think that this is a very simple, actually appeared to be affixed to the surface after construction, does not produce the pink of perfection, shedding and bubble, is a rather important matter. 1. remove plaster. Remove the paint, wallpaper, and other objects on the wall. If the walls have cracks and holes, to fill these places with gypsum powder, after leveling with bandages; case sand Huiqiang, partition, but also full of paste glass cloth or dacron cloth; some of the poor quality of the wall or walls to achieve the effect of heat preservation, need to nail plasterboard completely. 2. brush base oil. Brush the alkyd varnish evenly on the wall, with moderate thickness. 3. scraping putty, grinding. The wall for two times phi putty. After the putty dries, use sandpaper to polish the wall surface, grind out the uneven particles, and make the wall surface smooth and smooth. 4. cover oil. Again evenly with vegetable oil wall, do not need too thick. This will prevent walls from absorbing wallpaper glue, so that wallpaper affixed to the wall, but also to make the wall more flat. 5. cut wallpaper. Cut wallpaper also has regularity, such as every piece of wallpaper and adjacent two wallpaper color, pattern neat, size consistent and so on. 6. wallpaper. Roll the wallpaper evenly onto the wallpaper and place the wallpaper for a period of time. When the wallpaper is attached, the sides of the two pieces of wallpaper are crowded together to make it fit, and then the joint is pressed by the scraper and cleaned out. Wallpaper after using scraper will be posted up wallpaper from top to bottom flatten Kitchen decoration how to choose aluminum pinch plate? Home improvement in general, there are two places to consider the installation of aluminum buttons ceiling, one bathroom, one kitchen, then the choice of aluminum buttons ceiling should be considered. The ceiling in the bathroom should be hollowed out The bat