怎样鉴别门锁的质量(国外英语资料).docVIP

怎样鉴别门锁的质量 When the door that just buy the cheap, bad not change. But the door quickly update it can only carry the broken lock, full of shopping malls to find replacement products, because it involves the door hole and some problems we cant help it How can I tell the quality of a door lock? Surface treatment: a qualified lock surface smooth. Electroplating uniform. This bright surface is easier to identify. The drawing surface treatment (also called matte): drawing uniform fine dont have obvious bubble particles, it is 45 degrees viewing easier to find flaws. The 2. version and the thickness of the material: the door panel must reach a certain thickness, especially zinc alloy and aluminum alloy material. Because the lock is not stable if the thickness is not in place prone to fracture and other quality problems. Now many manufacturers in order to reduce the cost of occupying the market often use brain to reduce material cost. Now the international the prices of raw materials to reduce material is an effective way. Especially some aluminum aluminum lock, lock what is known as the aluminum space, but below the panel is hollow, but considering the problems often firmly under the panel lining plastic floor. What is the aluminum space? Build the aircraft aluminum... Dear friends I think hundreds of thousands of tons of waste materials, when used to do about 100 ocean treasure a lock? 1) material: stainless steel From a durable point of view, the best material should be stainless steel, especially for surface materials, the brighter the use. Its strong strength, corrosion resistance, color unchanged. But there are many kinds of stainless steel, mainly divided into ferrite and austenite. Ferritic stainless steel has a magnetic, commonly known as stainless steel, long time, the environment is not good will rust, only austenitic stainless steel will not rust, identification method is very simple, with a magnet to try to identify. 2) zinc alloy Zinc alloy material is much wo