打针成型 道理(国外英语资料).doc

注射成型 原理 Principle: the use of plastic injection molding and extrusion molding, loose granular or powdery material from the hopper into the heating and melting of the injection machine barrel temperature in plasticizing, make it become a viscous state of melt under high pressure, push the plunger or screw, with large flow rate through the closed mold injection nozzle the front end of the barrel into the low temperature, after a period of time after the cooling and shaping pressure, open the mold and the mold cavity can be extrusion of plastic parts with a certain shape and size of. Edit this paragraph 1, the definition of injection molding (Injection Molding): refers to a certain shape model, the melting state of the cavity formed by injecting colloidal touch pressure, process principle is: solid plastic according to certain melting point melt through the injection machine pressure, with a certain speed injection mold, mold the cooling will be obtained with the same plastic mold cavity design products. Mainly used for thermoplastic molding, but also for thermosetting plastic molding. Edit this paragraph 2, the process of complete injection process, including: 1, preparation before molding; 2, injection process; 3, the post-processing of products. 1. Preparation before molding In order to make the injection molding run smoothly and guarantee the quality of the products, a series of preparations, such as raw material pretreatment, washing machine barrel, preheating insert and selective release agent, are needed before production. 2, injection process The injection process usually involves: feeding - plasticization - injection - cooling - release. Feeding: as injection molding is a batch process, it requires quantitative (constant volume) feeding to ensure stable operation, uniform plasticization of plastics, and finally high quality plastic parts. Plasticizing: a process in which material is converted into a continuous homogenized melt by loose, powdery or granular so