百年电锁(国外英语资料).docVIP

百年电锁 And the quality of life of city residents to improve, for the load and the load center, power supply radius of low voltage distribution network gradually narrowing (downtown is not more than 100 meters) requirements, must be in the dense population and building density of commercial, economic and cultural center construction and distribution facilities, but the city center of the downtown area, cultural relics protection zone area, city planning departments have special requirements on the city landscape and overall environment, so the ground transmission and distribution facilities is very large, and the conventional ground box type substation caused by coordination with the surrounding environment, affecting the coordination environment of the city, city residents and tourists on the ground box is also quite critical, in addition to on the box construction in addition to expensive land, the demolition site difficult, irregular, difficult construction conditions etc. factor to the substation construction brought Many unfavorable factors. In order to solve the problem that the substation is not in harmony with the surrounding environment, the prefabricated underground box type substation products become a big demand of the power supply sector, and the construction of prefabricated underground box type substation becomes inevitable. The use of prefabricated underground box type substation can be arranged on the sidewalk, making full use of underground space, and all equipment installation was completed in a factory installation box only box part and the cover part of the hoisting, greatly saves the construction period. Thesis bar Thesis bar 2. electrical part Thesis bar The prefabricated underground box is suitable for the electric load switch and the short circuit / ground fault indicator, and the transformer outlet is configured with a SF6 load switch fuse combination. The entrance and exit of HV cables are all down, down and out. Used transformer sealed oil