粉煤灰烘干机 郑州丰达粉煤灰烘干机任务道理及特色(国外英语资料).docVIP

粉煤灰烘干机 郑州丰达粉煤灰烘干机工作原理及特点 With the continuous development of environmental protection concept, the whole society is making contribution to environmental protection and energy saving. The reuse of fly ash is an urgent problem for thermal power plants. Fly ash is a new type of environmental friendly material and is popular in the market. In most areas, the investment has been made for the reuse of fly ash into waste materials. In this paper, Feng Das machinery is introduced to optimize the scheme of the fly ash dryer. I. optimization of ventilation and dust removal equipment for drying machine The selection of ventilation and dust removal equipment is the key, and the ventilation effect of the dryer directly affects the output of the station. In order to produce high output, the dust collector with large air volume must be selected. Ensure the drying machine feeding end of certain pressure in combustion furnace to produce high temperature gas suction drying machine, and make the material drying heat exchange occurs rapidly, timely discharge, reduce the concentration of the waste as much as possible, to achieve rapid drying. At present, the drying and dust removal usually use bag dust removal, while the original cyclone dust removal, electrostatic dust removal, etc., although the ventilation effect is good, but the dust concentration is high, pollution is serious. The selection of the amount of waste gas in a bag filter depends on the size of the dryer, the structure, the type of drying material and the moisture content. Two. Internal modification measures of drying machine Drying machine (sawdust drying machine) internal transformation is very important to bake. Dry machine internal transformation investment is not large, is relatively simple, but must understand the structure principle of drying machine and drying materials and supporting precipitator, combined with daily experience making feasible alteration. The general method of transformation is as follows: (1)