基于Geomagic spark的手扶式插秧机变速箱箱体重构.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2017, 6(1), 60-67 Published Online March 2017 in Hans. /journal/met /10.12677/met.2017.61009 Optimum Design of Transmission Box for Hand-Held Transplanter Based on Geomagic Spark Weilong Cao, Yaping Wang, Shanqi Du, Chunhui Chen, Jiateng Wu Harbin University of Science and Technology, Harbin Heilongjiang th th st Received: Mar. 10 , 2017; accepted: Mar. 28 , 2017; published: Mar. 31 , 2017 Abstract The gearbox is one of the core components of the transplanter. In this paper, according to the transformation of the gearbox body, Geomagic spark, a reverse engineering software, is applied to reconstruct the gearbox body, and then the optimization design is made on it. Firstly, the gearbox is scanned by hand-held laser scanner, and the 3D point cloud data is obtained. Then, the point cloud is reconstructed by using the Geomagic spark software. The three dimensional geometric model of transmission box is reconstructed by using the triangular mesh data. According to the obtained three dimensional geometric models, the model is optimized. Finally, the finite element analysis is carried out in Solid-Works Simulation, which provides a theoretical basis for the opti- mization design of the box. Using reverse engineering technology to optimize the transplanter gearbox, it can shorten the design cycle and reduce design costs. Keywords Transmission Box, Reverse Engineering, Geomagic Spark, Geometric Model, Optimized Design 基于Geomagic spark的手扶式插秧机变速箱箱 体重构 曹伟龙，王亚萍，杜善琦，陈春辉，吴佳腾 哈尔滨理工大学，黑龙江 哈尔滨 收稿日期：2017年3月10 日；录用日期：2017年3月28 日；发布日期：2017年3月31