CAD应用技巧44列档(国外英语资料).docVIP

CAD应用技巧44列档(国外英语资料) In AutoCAD, sometimes the intersection tag is generated by the mouse click, with the BLIPMODE command, which can be removed by entering OFF at the prompt line. Some users will find that the dialog box in the command will turn into a prompt when using AutoCAD, such as the print command, which controls the system variable CMDDIA and turns it off. The ellipse, which is generated by elliptic commands, is the polysemy or the ellipse is determined by the system variable, PELLIPSE, and when it is 1, the resulting ellipse is PLINE. The CMDECHO variable determines whether the command line echo is produced, and it should be set to 0 in the execution of the program. DIMSCALE determines the scale of the dimensioning, its value is an integer, the default is 1, and it is best to change it to scale when the graph has a scaled scale. The BREAK separates the two entities from two points, and the first point is to separate the entities from the first. 7. CAD is provided in the form of a higher version of tolerance, roundness and alignment of the circle is not round, in fact, common symbols defined in AutoCAD in AutoCAD installation directory SUPPORT the subdirectory GDT. The SHP file, the no. 2 and 4 character defines the shape of round, round the radian of unexpectedly is 127 °, but not too good of correction (e.g., to 90 ° more not good). 8. The hollow BONUS feature of Chinese character glyph if use AutoCAD R14 (AutoCAD must install is complete, or custom installation chose it), there is a TXTEXP command, the text can be Fried for line, stereoscopic word is useful to do. The BONUS of AutoCAD R14 has an ARCTEXT command that implements curved text output, using the method to select the arc first, and then enter the text, press OK. There is also a useful command in BONUS: MPEDIT, which USES it to modify multiple lines together as a multiline, and then change its line width. 11. The image of command in the R14 replaces the R13 BMPIN and PCXIN command, embedding bit