数码相机的常用拍摄模式(国外英语资料).docVIP

数码相机的常用拍摄模式(国外英语资料) Canon DC operation Digital cameras usual mode of shooting The conversion of digital camera mode is based on rotating camera mode. AUTO (fully automatic mode) This is the most convenient shooting pattern. You just have to take photos, focus and press the shutter. As for the white balance, the shutter, the aperture, the ISO value, etc., to the camera to handle automatically. In this mode, the imprecision of the parameter setting results in a very generic and featureless image. P (program automatic exposure mode) This mode allows the camera to automatically set the shutter speed and aperture size, the same as the AUTO mode. If the correct exposure is not made, the shutter speed and aperture value on the LCD display will be shown in red. You can adjust many parameters manually. Under the condition of the exposure is not correct, for example, can be obtained by manual changes have flash, ISO value, change the way of metering method, exposure compensation and so on make the image correct exposure. You can also use white balance Settings to show more realistic image colors. It is important to know that photo effects (such as black and white) and even racquet mode cannot be adjusted in AUTO mode. Tv (shutter priority mode) In the shutter priority mode, the shutter speed is set, and the appropriate aperture value is chosen automatically. Faster shutter speeds allow you to capture instant images of a moving body. Slower shutter speeds create a fluid effect that is often used when shooting nighttime scenes. When the shutter speed is set, half click the shutter, and if the aperture value is shown to be red in the focus process, it is incorrect to indicate that the image is exposed. You need to change the shutter speed until the aperture value is white. This is because the aperture value is also limited. Av (aperture priority mode) The aperture priority is to set up the aperture size, which is required in advance, to automatically adjust other parameters acco