有线数字电视维护(国外英语资料).docVIP

有线数字电视维护(国外英语资料) Common failure and exclusion of cable digital TV clients Key words: digital set-top box common fault digital TV judging method digital signal Mosaic phenomenon With digital TV set-top box large-scale popularization and application, users in the use process often encounter many problems caused by the set-top box, according to the daily maintenance and maintenance under the digital TV set-top box in the process of fault, analyze the fault phenomenon, from the perspectives of its causes and solutions, to summarize, in order to better maintenance and use of digital cable TV, improve the quality of digital TV users ratings, DongTai used by our company, we now, nate set-top box as an example. Fault phenomenon: Mosaic or freeze phenomenon, users cant normal watch, duplicate or appear a few not watching, TV images appear two different voice, without authorization, unable to watch the show, and so on. Cause of failure and solution: There are five reasons why you cant see a set-top box when you turn on. (1) the television has not been switched to the corresponding audio and video AV channel; (2) the line connection error; (3) no normal boot; (4) there is no electricity; (5) the set-top box is in standby mode. Switch the TV input source to the corresponding audio and video interface (different brand TV sets AV or AV1, AV2, AV3 or TV/video select signal input, source input, etc.). Check signal line, video AV connection is correct, and have good contact. If the set-top box display is displayed, the channel number is switched on. If you are not working properly, you will need to restart. Check the power line, ensure the power supply, and activate the set-top box by the box power key. There are three reasons why the program is not searchable. (1) the search process was interrupted; (2) the indoor wiring has many extension machines; (3) the network causes the signal of individual frequency to be disturbed. To search (DongTai, nate set-top box) : according to the r