水电安装之电线管预埋作业指导(国外英语资料).docVIP

水电安装之电线管预埋作业指导(国外英语资料) Instructions for the pre-buried work of the power line tube for hydropower installation One,????? Job content The terminal system of the junction box, the positioning of the measuring line, the drilling of the template, the welding bracket, the installation of the wire box, the installation of the pipe, and the protection of sealing Two,??? Construction preparation Materials preparation: ????? Before construction, the various materials and prefabricated parts required for each layer shall be calculated according to the detailed drawings of the construction, and the statistical table shall be set up to facilitate the supply of materials and the use of quotas. The flame retardant PVC pipe should be used in the pre-buried concrete structure. It is required that the resistance to compressive resistance is good; The tubing should be flexible and flexible, and the bending is not easy to break, and the flexible construction electrician USES the non-plasticized rigid flame retardant PVC pipe. Pipe, junction box, joint casing, lock, glue and other suitable products. The height of the outlet box for the hole spacing should match the distance of the steel bar and the template. The inner diameter of the sleeve and the lock should be closely matched with the outside diameter of the catheter. The pipe and its accessories should be inspected in the field of entry. The PVC pipe should be evenly distributed, no deformation and bubble crack, etc., which requires the inspection report of fire products and the factory certificate, the oxygen index is greater than 27%. The connection box should be smooth and smooth. The pipe and connection box should have clear manufacturer name and trademark, specification type, and execution standard number. Other materials: Nails, wire, tape, sawdust, paint 2.????? Machinery and tools: Hand electric drill, opener, cutting machine, saw blade, pliers, measuring tape, horizontal ruler, line drop, brush pen, red pencil 3.????? Tec