网通宽带错误代码详解大全(国外英语资料).docVIP

网通宽带错误代码详解大全(国外英语资料) The netcom broadband error code is detailed The ADSL dial-up error code details (the code has been updated to VISTA) Conclusion: Encountered a common solution of 678: 1, first of all confirm the adsl modem dial is normal, because the network card automatically obtain IP is not clear, so again dial card cant get a new IP address will be prompted to 678, operation method is: close the adsl modem, right-click the local connection into the control panel of network connection select disabled, right-click the local connection option enabled after 5 seconds, and then open the adsl modem dial; 2, if the first step is invalid, in the case of closed adsl modem, still disable local connection (nic), restart your computer, and then enable the local connection (nic), open the adsl modem again can solve; 3, if the above steps cant solve, to check the card the light is bright, the light not bright if the network card, see sent the single repository: card light not bright or not often on the solution 4, if the card light normal step 1, 2, cannot solve the lead user uninstall network card drivers, reshipment network card drive, if the user xp system in accordance with the: knowledge number: 9973, how to set up under WINXP ADSL dial-up connection method to lead the user to create a dial-up connection, if 98 system suggest users to install Raspppoe software or EHERNET300 connection. 5, if the above operation fails to contact the telecommunications department to confirm the port. The code of ADSL PPPOE dial-up error code summary: Error 602 The port is already open Problem: the dial-up network network cannot be connected because of the device installation error or is being used Why: PPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 605 always set port information Problem: dial-up network network because device installation error cannot set the usage port Why: PPPoE is not fully and properly installed Solution: u