电工学概论(国外英语资料).docVIP

电工学概论(国外英语资料) General practice of electrotechnics Chapter one production of electricity Essay question What are the two basic properties of a voltage source? Answer: (1) its terminal voltage is a fixed value, regardless of the output current. (2) the magnitude and direction of its output current are determined by the external circuit load connected to it. What are the two basic properties of current sources? Answer: (1) the current that it emits is a fixed value, I S, and it has nothing to do with the output voltage. (2) the magnitude and direction of its output voltage are determined by the external circuit load connected to it. What are the two equivalent power models? A: there are two types of voltage source model and current source model. Noun explanation 3 phase ac power supply A: to point to by three equal, the same frequency, phase difference of 120 ° to each other symmetrical sinusoidal ac electromotive force power supply system. 2. The phase sequence A: the sequence of positive (or corresponding zero) values of a three-phase alternating current is called the phase sequence, which is U V W in turn. neutral A: the conductor from the neutral is called the neutral line, commonly known as the geodesic. 4. The phase line A: the three wires from the beginning of U 1, V 1, and W 1 are called phase lines or end lines, commonly known as fire lines. Phase voltage A: the voltage between the phase line and the neutral line is called the phase voltage. Line voltage A: voltage between two phase lines is called line voltage. Chapter ii circuit Fill in the blanks. 1. Ac voltage instantaneous value for, and on both ends of pure resistance, resistance R = 484 Ω, resistance current instantaneous expression is, for the loss of power. 2. Ac voltage instantaneous value for, and on both ends of pure inductance, inductance L = 1.54 H, the inductance current instantaneous expression is, the inductance current valid values are, for the loss of power. 0 3. The ac voltage instantaneous