若何修复笔记本电池损耗!!!(国外英语资料).docVIP

如何修复笔记本电池损耗!!!(国外英语资料) Notebook battery repair step Prepare before repair Before repair, we need to understand the current state of the battery, how long does it take to get from a full charge to the battery, in order to better understand the status of internal use battery, we need to know the battery discharge curve. Need a software called BatteryMon here everyone can baidu once, this software is to monitor the usage of laptop batteries, after installation, we can monitor the usage of laptop batteries. Fix it The laptops BIOS might have a built-in laptop battery fix, and how do we check our laptop BIOS for this feature? First, we need to restart the laptop At the start of the machine, press F2 so that you can enter the BIOS of your laptop When we enter the BIOS, we enter the POWER menu (that is, the POWER menu) Find the Start Battery Calibration (that is, laptop Battery correction). Select it, return to run Then the screen will turn blue, there will be a English message, tip should be inserted notebook power adapter charging, then we according to clew operation, connected to the notebook power adapter (if you have hooked up, may not be prompt) Wait for the power to be full, and then you will be prompted to disconnect the power adapter and follow the instructions, and we will be waiting for the laptop to run out of power automatically When we wait to turn off the power, we connect to the external power source, and dont start the machine. Waiting for the power to be filled (the charging indicator is the light with the lightning out) When the charge is over, we start the computer again So we will complete the made a laptop battery repair operations, we can through the BatteryMon this software to observe our battery discharge curve, discharge if there is a significant improvement are you looking at? What if we cant find the Start Battery Calibration in step 4 above? Start the computer, open my computer - control panel - power options - use the battery power supply