输送带知识(国外英语资料).docVIP

输送带知识(国外英语资料) Conveyor belt conveyor is one of the most expensive, the durability of the worst parts, in the process of conveyor running, conveyor belt by a variety of different nature and size of cutting load, is under a very complex stress state. The most typical forms of damage are: worksheet and edge wear; The impact of a large rock rock causes breakdown, tear and dissection; The core is caused by repeated bending stress through the short flute and the torrollers. Under the action of environmental media, the index of strength index is decreased and ageing etc. The calculation shows that the conveyor belt cost about half the cost of all the equipment. Therefore, according to the conditions of the conveyer, Select suitable conveyor belt and strengthening maintenance and management in the operation, prolong its service life, to enhances the working efficiency of the conveyor, conveyor production cost is of great significance. The rubber band used by the universal belt conveyor (figure 1-2). Rubber belt is suitable for the working environment temperature between 10 ~ + 400 ℃, material temperature shall not exceed + 500 ℃. When the temperature exceeds 500 ℃, the elasticity of the rubber bands began to disappear, such as temperature too low, tape will harden occurred cracks. When temperature more than + 900 ℃, should use the fire retardant conveyor belt; Temperature is lower than 15 ~ 550 ℃ cold should be used when the conveyor belt. Rubber conveyor belt details (2) Rubber bands are the most widely used in practice. The basic constructs are shown in figure 1-2a. It consists of the core and the covering glue. The core of the tape is the backbone of the tape, which is designed to withstand the load and the impact of the material on the tape. Ordinary rubber belt core is made of multi-layer hanging plastic canvas, with the core material can be nylon fabrics such as cotton, vinylon, or blended canvas, can also be a thick layer of chemical fiber whole woven cloth, as show