齿轮传动论文(外国英文资料).doc

齿轮传动论文(国外英文资料) catalogue Pick to keywords The introduction The failure of the gears and the cause of failure The failure of gear rotation Abstract: through the analysis of the failure mode of gear, find the corresponding solution, improve the gear quality and prolong the life of the machine. The failure form of analysis is helpful to establish the principle of gear design, and put forward measures to prevent and mitigate failure. Key words: failure; Tooth broken; Tooth pastry erosion; Tooth surface glue; Tooth surface wear; Tooth surface plastic deformation The gear is one of the most widely used important basic components in modern machinery. Gear type many, have straight gears, helical gears, herringbone tooth, tooth surface hardness have soft tooth surface and the hard tooth face, have high low speed gear, gear device with open and closed, the load is heavy, so many factors influence, so will appear all sorts of different failure modes in practical application. Gear failure mainly in tooth part, its common failure forms are: broken tooth, tooth surface erosion, tooth surface wear, tooth surface agglutination and five kinds of tooth surface plastic deformation. Introduction: in recent years, countries in the aspect of key parts damage failure mechanism study on the basis of the work, for the wind power gear box system design and manufacture of advanced technology research and development has laid a solid foundation. Chinas wind power industry has boomed in recent years, with 18GW installed in 2011, ranking first in the world. Must be closely related to the basic theory of gear box design and manufacturing technology and development direction, to shorten our country and the worlds advanced countries in designing and manufacturing level of the transmission system of technology gap significantly.. The failure of gear transmission is one of the forms of failure of mechanical equipment, which means the loss of design function or damage failure in operation. For exampl