国家最新的 建筑面积计算规则 _360问_20141110_235012(国外英文资料).doc

国家最新的 建筑面积计算规则 _360问235012(国外英文资料) The latest national building area calculation rules the new building area calculation rules building area calculation rules I. the scope of the building area is calculated The 1 storey building, no matter how its height were calculated according to a layer, the construction area is calculated according to the level of the outlying area above the plinth of buildings. In a single building, such as those with a number of floors, the floor area should be calculated. 2, the level of the single span buildings, such as building area were calculated, when the high span side span, the construction area above the plinth gable ends of outer surface of the horizontal length multiplied by the walls above the plinth surface to the high cross in the outside of the column level line width Calculation。 When the high span span, calculate the horizontal width of the construction area above the plinth gable ends by the outer surface of the horizontal line in the outside of the column length. 3, multi-storey buildings construction area is calculated according to the total construction area of each layer, the bottom wall at the building above the plinth peripheral horizontal area calculation, two layer and two layer above the wall by horizontal area calculation. 4, basement, semi basement, underground workshops, warehouses, shops, underground headquarters of the building entrances and the corresponding area by the upper wall (not including light wells, moisture-proof layer and protective wall) area of the external level calculation. 5, with deep foundation to make underground overhead layer to use, more than 2.2 meters high layer, according to the overhead layer of the horizontal area of half of the calculation of construction area. 6, the use of suspending buildings on hillside to be used to do overhead layer and the height of over 2.2 meters, the construction area at the level of peripheral area of enclosure. 7, through the corridor of the