标准麻花钻刃磨的方法和技能(国外英文资料).docVIP

标准麻花钻刃磨的方法和技巧(国外英文资料) Standard sharpening methods and techniques.Txt the most precious thing in the world is not what you can never get or what you get, but what you have gained and may lose at any moment! Love is a lamp, while friendship is the shadow. When the lamp is off, you will find the shadow everywhere. Friend is who can give you strength at last. Methods and skills of sharpening standard twist drills The twist drill is a common drilling tool for machining purposes. The structure is simple, but its not an easy job to sharpen it. The key is to grasp the method and skills of sharpening, the method is mastered, the problem will be solved easily. Id like to introduce some manual sharpening techniques for twist drills. Twist drill vertex angle is generally 118 degrees, can also be treated as 120 degrees to look at. Sharpening drills mainly have several skills: 1, blade and grinding wheel surface. Before grinding the drill bit, the main cutting edge of the drill bit and the grinding wheel surface should be placed on a horizontal surface, that is to say, when the blade is touching the grinding wheel surface, the whole blade must be sharpened. This is the first step between the bit and the grinding wheel. Position it again and slowly lean against the wheel surface. 2, the axis of the drill should be 60 degrees from the surface of the grinding wheel. This angle is the front angle of the drill, at this point the angle is not right, it will directly affect the size of the drill point and the shape of the main cutting edge and the angle of the cross edge. Here refers to the drill axis and the surface of the wheel between the location of the relationship, take 60 degrees on the line, this angle is generally more accurate. Attention should be paid to the relative horizontal and angular positions of the bit before sharpening, and the two should not consider the setting angle in order to settle the blade, or ignore the blade in order to set the angle. 3, from the edge of t