梁桥悬浇法施工(国外英文资料).docVIP

梁桥悬浇法施工(国外英文资料) Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Modern construction technology Cantilever casting method for beam bridge construction Cantilever casting method for large span continuous box girder bridge construction 1. span continuous bridge cantilever construction of large-span cantilever construction of continuous beam bridge cantilever construction is divided into: the cantilever (cantilever) and cantilever erection (cantilever construction is divided into: the cantilever (cantilever) and cantilever assembly (cantilever). Cantilever method is when the pier top pouring, cantilever is when the pier top pouring, installed on the top of the pier scaffold steel truss and extends to both sides for vertical cantilever hanging basket, symmetric concrete pouring. A cantilever is extended to both sides to be used for hanging the basket vertically, and the concrete is symmetrically poured. The suspension spelling is divided into segments which are divided into prefabricated blocks, assembled and tensioned, and the suspension spelling is divided into segments which are divided into prefabricated blocks, assembled and tensioned, and is made into a cantilever by itself. Self cantilever. The cantilever construction for long span prestressed concrete box section continuous beam, cantilever construction for long span prestressed concrete box section continuous beam, cantilever rigid frame bridge type construction, beams, etc. T rigid bridge construction on navigation, interference under the bridge, the rigid bridge type construction of bridge navigation interference small, with prestressed concrete under negative bending moment and tensile properties. The tensile and negative bending moments of prestressed concrete. 1- pier top section 2- suspension casting part, 3- side hole support, cast-in-place part, 4- closure section, partial pier, top beam section, suspe