察哈素煤矿厚煤层综采工作面煤柱合理宽度模拟研究及实践分析.pdfVIP

第44卷摇 第2期 矿业安全与环保 Vol郾44 No郾2 2017年4月 摇 摇 摇 摇 摇 摇 摇 MINING SAFETY ENVIRONMENTAL PROTECTION摇 摇 摇 摇 摇 摇 摇 摇 摇 Apr郾2017 谭凯,孙中光,林引.察哈素煤矿厚煤层综采工作面煤柱合理宽度模拟研究及实践分析[J].矿业安全与环保,2017,44(2):91-94. 文章编号:1008-4495(2017)02-0091-04 察哈素煤矿厚煤层综采工作面煤柱合理宽度 模拟研究及实践分析 谭摇 凯,孙中光,林摇 引 (中煤科工集团重庆研究院有限公司,重庆400039) 摘要:煤柱宽度的合理留设是确保厚煤层双巷布置综采工作面安全回采的关键。 针对察哈素煤矿 因煤柱留设不当而导致回采巷道大范围破坏的问题,采用数值模拟的方法研究了巷道失稳的原因和煤 柱的合理宽度。 结果表明:工作面煤柱宽度不足导致巷道两侧支承压力叠加是巷道维护困难的主因。 通过对比不同煤柱留设条件下采场应力、收敛变形和塑性区分布情况,得出该矿合理的煤柱宽度为 35 m。 现场实践表明,该方案的技术及经济效益显著。 关键词:厚煤层;煤柱宽度;收敛变形;数值模拟 中图分类号:TD323摇 摇 摇 文献标志码:C摇 摇 摇 网络出版时间:2017-04-11 10:11 网络出版地址:http:/ / / kcms/ detail/ 50.1062.TD1011.016.html Simulation Study and Practice Analysis of Rational Width of Coal Pillar in Fully-mechanized Face of Thick Seam in Cahasu Coal Mine TAN Kai,SUN Zhongguang,LIN Yin (China Coal Technology and Engineering Group Chongqing Research Institute,Chongqing400039,China) Abstract:The reasonablewidth of coalpillaristhekeyforensuringsafeproductionoffully-mechanizedworkingfacewith double-roadwaylayoutinthethickseam. Toaimattheproblemsof coalroadwaylarge-rangebreakagecausedbyunreasonable coal pillar dimension in Chahasu Mine, numerical simulation method was used for researching the reasons of the roadway instability and the reasonable width of coal pillar. The results showed that insufficient width of the coal pillar was the main reason leading to the abutment pressure superposition on the roadway two sides and the difficult maintenance of the roadway. Through the comparisonofthestopestress,convergencedeformationandplasticzonedistributionundertheconditionofdifferent width of the coalpillar,itwasobtained