澳大利亚食品接触材料测试选编.PDFVIP

本期导读 澳大利亚食品接触材料测试 澳大利亚食品接触材料测试 Australian food contact materials testing 食品接触材料类产品销往澳大利亚，市场认可欧盟1935/2004/EC法规和美国FDA相关法规。 这是因为相对于美国和欧盟，澳大利亚尚未建立起一个全面的涉及食品接触的安全法规体系像 欧盟(EC)No.1935/2004/EC 法规或美国 FDA。对食品接触材料的安全控制基本是通过生产企业和 经营者的自我管理方式来确保。 Food contact materials products sold in Australia, can be tested by the European Union (EC) No.1935/2004/EC regulations and the U.S. FDA regulations. This is because relative to the United States and the European Union, Australia has not yet established a comprehensive safety regulations involving food contact safety regulatory system like the European Union (EC) No.1935/2004/EC regulations or the U.S. FDA. Control the safety of the food contact material is basically through manufacturers and operators of self-management to ensure 。 澳大利亚针对食品接触材料的法规要求集中体现在《澳大利亚新西兰食品标准法》中，法 典的 1.4.3部分对食品接触制品予以定义并规定了通用性的要求：一是食品接触制品不能给消 费者带来伤害和不适，二是材料必须是安全和满足预期使用要求。但法典并没有指定具体食品 接触材料安全规范要求，对材料如何生产也不做出任何强制规定。 Australian regulations for food contact materials requirements embodied in the Australia New Zealand Food Standards Code. The section 1.4.3 of the code defined the food contact products and specifies requirements for versatility: first, food contact products can not bring harm and discomfort to consumers, and second materials must be safe and meet anticipated requirements. However, the code has no specific safety regulations for food contact materials and has no mandatory requirement on how to produce the materials. 相关标准或法规有： 塑料：欧盟 EU NO.10/2011 或美国FDA的测试项目均适用于澳洲 AS2070：1999 。 陶瓷、玻璃、搪瓷器皿：澳洲 No.289, 1991条例。测试项目：可溶性铅和镉测试。 金属器皿：西澳统一条例健康（食品卫生）条例 No. 41, 1993。测试项目：可溶性重金属 （铅、镉、锑、铜、锌）. R