气固射流流化床的燃烧模拟论文.pdfVIP

气- 固射流流化床的燃烧模拟 Ruoyu Hong Chemical Engineering Department, Soochow University, Suzhou, 215006, China, E-mail: rhong@suda.edu.cn Hongzhong Li Multiphase Reaction Lab., Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100080, China ABSTRACT was developed to predict the bed expansion. Lettieri et al. [13] reported the experimental results of the Related referential studies of the temperature influence on temperature influence on the fluidization behavior with the hydrodynamics in gas-solid fluidized beds were reviewed. temperature range from ambient conditions up to 650℃. The Two-dimensional (2-D) numerical modeling and simulation pressure drop versus gas velocity at high temperature, bed based on a two-fluid model for gas-solid fluidization was collapse time versus temperature were measured. Later, Lettieri conducted. The modified IMF algorithm was employed to solve et al. [14] reported their experimental observations on the the governing equations expressed in the conservative form in homogeneous bed expansion of three FCC catalysts with the 2-D Cartesian/Cylindrical coordinates. The solid-phase increasing temperature from ambient up to 650 ℃. The pressure was modeled via the local sound speed. The gas-phase parameters of the Richardson—Zaki equation were estimated and turbulence