工字型内芯全钢防屈曲支撑抗震性能分析.pdfVIP

Study on Seismic Behavior of the all steel Buckling Restrained Brace with H Section Core A Dissertation Submitted for the Degree of Master Candidate ：Sun Na Supervisor：Prof. Zheng Hong Chang’an University, Xi’an, China 万方数据 万方数据 万方数据 万方数据 摘 要 防屈曲支撑是一种耗能良好的支撑形式，它改善了中心支撑在强震作用下受压容易 屈曲的缺点，并且施工安装方便，易于标准化生产。 本文根据现有的研究成果，主要对工字型内芯全钢防屈曲支撑进行有限元分析，对 影响支撑稳定性的各参数进行对比分析，为该类型的防屈曲支撑提供一些设计建议。 首先，对全钢防屈曲支撑进行整体稳定和局部稳定的理论分析，分别得到了保证全 钢防屈曲支撑整体稳定性能约束比的限值以及保证全钢防屈曲支撑局部稳定性能宽厚 比的约束条件。 其次，利用ANSYS 有限元分析软件对工字型内芯全钢防屈曲支撑进行有限元分析， 分别研究了间隙、约束比和宽厚比等对全钢防屈曲支撑稳定性能的影响，并给出合理的 设计参数取值。 最后，通过 SAP2000 有限元分析软件，对纯钢框架、普通支撑钢框架、工字型内 芯全钢防屈曲支撑钢框架进行了反应谱和时程分析，分别得到了三种钢框架在多遇地震 和罕遇地震下的顶层位移以及顶层加速度时程曲线，对比分析了三种钢框架之间抗震性 能的不同。 关键词：全钢防屈曲支撑;稳定性;有限元分析;时程分析 I 万方数据 Abstract Buckling Restrained Brace(BRB) is a kind of support form with good energy dissipation,it can improve the shortcoming of the center brace,at the same time it is beneficial to its installing and standardized production. This paper is based on the existing research results,it mainly focuses on the all-steel BRB with H section core by finite element analysis,and in this paper the parameters which influence the stability of BRB are analyzed.These research results can provide some design suggestions for the all-steel BRB with H section core. First,analyzing the stability of the all-steel BRB ,and based on this,the limiting value of restraining ratio which keep the overall stability of all-steel BRB and the limit condition of width-to-thickness ratio which kee