ASME A213- ASME Ⅱ A-2007 EN.pdfVIP

2007 SECTION II, PART A SA-213/SA-213M SPECIFICATION FOR SEAMLESS FERRITIC AND AUSTENITIC ALLOY-STEEL BOILER, SUPERHEATER, AND HEAT-EXCHANGER TUBES SA-213/SA-213M (Identical with ASTM Specification A 213/A 213M-99a 1 except for the additional H Grade heat treatment requirements in 6.4, the editorial deletion of 11.5, and the editorial addition of Grade T92 to 6.1.3.) 1. Scope unless the “M” designation of this specification is specified 1.1 This specification covers minimum-wall-thickness, in the order. seamless ferritic and austenitic steel, boiler and superheater tubes and austenitic steel heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 2. Referenced Documents 1–3. 2.1 ASTM Standards: A 262 Practices for Detecting Susceptibility to Intergranu- 1.2 Grades TP304H, TP309H, TP309HCb, TP310H, lar Attack in Austenitic Stainless Steels TP310HCb, TP310HCbN, TP316H, TP321H, TP347H, A 450/A 450M Specification for General Requirements TP347HFG (fine grained) and TP348H are modifications for Carbon, Ferritic Alloy, and Austenitic Alloy Steel of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, Tubes TP316, TP321, TP347, and TP348, and are intended for E 112 Test Methods for Determining Average Grain Size high-temperature service, such as for superheaters and E 527 Practice for Numbering Metals and Alloys (UNS) reheaters.