CATIA_多轴加工A概要1.ppt

Copyright DASSAULT SYSTEMES 2002 Multi-AxisSurface Machining Table of Contents (1/2) Wing p.4 Design Process p.5 Create a new Part Operation p.6 Create a Multi-Axis Sweeping Operation p.8 Create a Multi-Axis Contour Driven Operation p.16 Create a Multi-Axis Curve Machining Operation p.20 Hood p.24 Design Process p.25 Perform a Sweep Roughing in 3-Axis p.26 Perform a Multi-Axis Sweeping Operation p.27 Perform a Multi-Axis Contour Driven Operation p.28 Perform a Multi-Axis Curve Machining Operation p.29 Pocket p.30 Design process p.31 Tangent Axis with Infinite Fanning p.32 Tangent Axis with Small Fanning p.33 Table of Contents (2/2) 4. Isoparametric and Drill p.34 Design Process p.35 Create a Multi-Axis Isoparametric Operation p.36 Create a Multi-Axis Drilling Operation p.37 Master Exercise Wing In this exercise, you will learn 5-Axis Surface Machining fundamentals concepts by machining a part from the 3D. You will define parameters within the Part Operation and use provided tools within a tool catalog. You will see also how to define a geometry and a strategy. Design Process: Wing Master Exercise Wing (Step 1): Create a new Part Operation In this step, you will learn how to define a new Part Operation. For this operation, you will see how to: Access to MMG workbench Access to the Part Operation Select a Machine and a catalog Define the Part to machine Define the Stock Define a Tool Change Point Do It Yourself Access to MMG Workbench Set the Part Operation Parameters Select a 5-Axis machine, a tools catalog Define a Design Part, a Stock Define a Tool Change Point Master Exercise Wing (Step 2): Create a Multi-Axis Sweeping Operation In this step, you will learn how to perform a 5-Axis Sweeping Operation. You will see a Multi-Axis Sweeping Operation with: Fixed lead and tilt Tool Axis Guidance, Fixed lead and variable tilt Tool Axis Guidance, Fixed Tool axis mode, Thru a Point Tool axis m